Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 97
dcb enable auto-detect on-next-reload, Usage, information, Syntax, Parameters, auto-detect
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Usage information If you do not use the statistics parameter, both hardware and DCBx counters clear. dcb enable auto-detect on-next-reload Enables or disables global DCB on a subsequent reload. This command also internally configures PFC buffers based on DCB enable/disable. Save and reload is mandatory for the configurations to take effect. Auto-detect keyword can be used to re-enable IOA with port wise DCB auto detect feature. Syntax dcb enable [auto-detect | on-next-reload] To disable global DCB on a subsequent reload, use the no dcb enable onnext-reload command. Parameters Defaults Command Modes Command History Example (Disable) auto-detect on-next-reload Enter the keywords auto-detect to re-enable the Aggregator with port wise DCB auto detect feature. Enter the keywords on-next-reload to apply DCB configurations on subsequent reload. DCB is globally enabled with auto-detect feature. • CONFIGURATION Version 9.4(0.0) Supported on the FN I/O aggregator. Dell#show dcb stack-unit 0 port-set 0 stack-unit 0 port-set 0 DCB Status: Enabled, PFC Queue Count: 4 stack-unit Total Buffer PFC Total Buffer PFC Shared Buffer PFC Available Buffer PP (KB) (KB) (KB) (KB) 0 0 3822 1912 832 450 Dell(conf)# Dell# Dell# Dell#conf Dell(conf)#no dcb enable on-next-reload Dell(conf)#end Dell# Dell#write memory ! Mar 18 00:21:49: %STKUNIT0-M:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash by default Dell#reload 97