Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 192
show link-bundle-distribution port-channel, Command, Modes, History, Version 9.40.0, Usage
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Command Modes Command History Usage Information EXEC Version 9.4(0.0) Supported on the FN I/O aggregator. Because this command calculates based on a Layer 2 hash algorithm, use this command to display flows for switched Layer 2 packets, not for routed packets (use the show ip flow command to display routed packets). The show port-channel-flow command returns the egress port identification in a given port-channel if a valid flow is entered. A mismatched flow error occurs if MAC-based hashing is configured for a Layer 2 interface and you are trying to display a Layer 3 flow. The output displays three entries: • Egress port for unfragmented packets. • In the event of fragmented packets, the egress port of the first fragment. • In the event of fragmented packets, the egress port of the subsequent fragments. NOTE: In the show port-channel-flow command output, the egress port for an unknown unicast, multicast, or broadcast traffic is not displayed. show link-bundle-distribution port-channel Display the traffic-handling and utilization of the member interfaces of the port channel. Syntax Command Modes show link-bundle-distribution port-channel EXEC EXEC Privilege Command History Version 9.4(0.0) Supported on the FN I/O aggregator. Usage Information The following table describes the output fields of this show command: Field Description Link-bundle trigger threshold Threshold value that is the checkpoint, exceeding which the link bundle is marked as being overutilized and alarm is generated LAG bundle number Number of the LAG bundle Utilization (In Percent) Traffic usage in percentage of the packets processed by the port channel 192