Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 386
keepalive, show fcoe-map, Related, Commands, Syntax, Parameters, Defaults, Modes, History
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 386 highlights
Related Commands fcoe-map - creates an FCoE map which contains the parameters used in the communication between servers and a SAN fabric. show fcoe-map- displays the Fibre Channel and FCoE configuration parameters in FCoE maps. keepalive In an FCoE map, enable the monitoring of FIP keepalive messages (if it is disabled). Syntax keepalive Parameters None Defaults FIP keepalive monitoring is enabled on Ethernet and Fibre Channel interfaces. Command Modes FCoE MAP Command History Version 9.6(0.0) Version 9.3(0.0) Supported on the FN 2210S Aggregator. Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module. Usage Information FIP keepalive (FKA) messaging is used to detect if other FCoE devices are reachable. To remove FIP keepalive monitoring from an FCoE map, enter the no keepalive command. Related Commands fcoe-map- creates an FCoE map which contains the parameters used in the communication between servers and a SAN fabric. show fcoe-map- displays the Fibre Channel and FCoE configuration parameters in FCoE maps. show fcoe-map Display the Fibre Channel and FCoE configuration parameters in FCoE maps. Syntax Parameters show fcoe-map [brief | map-name] brief Displays an overview of currently configured FCoE maps. map-name Displays the FC and FCoE configuration parameters in a specified FCoE map. The FCoE map is applied on Ethernet (FCoE) and FC ports to transmit FC storage traffic to a specified fabric. Command Modes • EXEC • EXEC Privilege 386