Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 160
show vlan, Status, Definition, meters, Impedance, Mismatch, Example, Related, Commands, Syntax
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Example Related Commands Status Length: 93 (+/- 1) meters, Status: Open Status: Impedance Mismatch Definition An opening is detected on the cable. The location, in this Example is 93 meters. The open is accurate to plus or minus one meter. There is an impedance mismatch in the cables. Dell#show tdr tengigabitethernet 0/1 Time since last test: 00:00:02 Pair A, Length: OK Status: Terminated Pair B, Length: 92 (+/- 1) meters, Status: Short Pair C, Length: 93 (+/- 1) meters, Status: Open Pair D, Length: 0 (+/- 1) meters, Status: Impedance Mismatch tdr-cable-test - Runs the TDR test. show vlan Displays the current VLAN configurations on the switch. Syntax Parameters show vlan [brief |id vlan-id | name vlan-name] brief (OPTIONAL) Enter the keyword brief to display the following information: • VLAN ID • VLAN name (left blank if none is configured.) • Spanning Tree Group ID • MAC address aging time • IP address id vlan-id name vlanname (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only information on the VLAN specified is displayed (OPTIONAL) Enter the keyword name followed by the name configured for the VLAN. Only information on the VLAN named is displayed. Command Modes • EXEC • EXEC Privilege Command History Version 9.4(0.0) Supported on the FN I/O aggregator. 160