Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 288
NPIV Proxy Gateway, show fcoe-map
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
29 NPIV Proxy Gateway The N-port identifier virtualization (NPIV) Proxy Gateway (NPG) feature provides FCoE-FC bridging capability on the FN I/O Aggregator with the FC Flex IO module switch, allowing server CNAs to communicate with SAN fabrics over the FN I/O Aggregator with the FC Flex IO module. To configure the FN I/O Aggregator with the FC Flex IO module to operate as an NPIV proxy gateway, use the following commands: show fcoe-map Display the Fibre Channel and FCoE configuration parameters in FCoE maps. Syntax Parameters show fcoe-map [brief | map-name] brief map-name Displays an overview of currently configured FCoE maps. Displays the FC and FCoE configuration parameters in a specified FCoE map. The FCoE map is applied on Ethernet (FCoE) and FC ports to transmit FC storage traffic to a specified fabric. Command Modes • EXEC • EXEC Privilege Command History Version 9.6(0.0) Version 9.3(0.0) Supported on the FN2210S Aggregator. Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module. Usage Information Use the show fcoe-map command to display the FC and FCoE parameters used to configure server-facing Ethernet (FCoE) and fabric-facing FC ports in all FCoE maps on an FN 2210S Aggregator with the FC Flex IO module NPIV proxy gateway. In each FCoE map, the values for the fabric ID and FC-MAP that identify the SAN fabric to which FC storage traffic is sent, and the FCoE VLAN to be used must be unique. 288