Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 307
show interface dcbx detail, Command, Modes, History, Version 9.40.0, Usage, Information, Example
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 307 highlights
Command Modes Command History Usage Information Example EXEC Privilege Version 9.4(0.0) Supported on the FN I/O aggregator. This command is supported in Programmable-Mux (PMUX) mode only. Specify a stack-unit number on the Master switch in a stack. Dell(conf)#do show dcb stack-unit 0 port-set 0 DCB Status :Enabled PFC Queue Count :2 Total Buffer[lossy + lossless] (in KB):7982 PFC Total Buffer (in KB) :5872 PFC Shared Buffer (in KB) :832 PFC Available Buffer (in KB) :4860 Dell (conf)# show interface dcbx detail Displays the DCBX configuration on an interface. Syntax show interface port-type slot/port dcbx detail Parameters port-type Enter the port type. slot/port Enter the slot/port number. Command Modes Command History CONFIGURATION Version 9.4(0.0) Supported on the FN I/O aggregator. This command is supported in Programmable-Mux (PMUX) mode only. Usage Information To clear DCBX frame counters, use the clear dcbx counters interface stack-unit/port command. The following describes the show interface dcbx detail command shown in the following example. Field Description Interface Interface type with chassis slot and port number. Port-Role Configured the DCBX port role: auto-upstream, autodownstream, config-source, or manual. DCBX Operational Status Operational status (enabled or disabled) used to elect a configuration source and internally propagate a DCB configuration. The DCBX operational status is the combination of PFC and ETS operational status. 307