Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 385

Parameters Defaults Command Modes Command History Usage Information Related Commands priority 128 FCOE MAP Enter the priority assigned to the FN 2210S Aggregator NPIV proxy gateway, which appears to a downstream server CNA as an FCF. The range of FCF priority values is from 1 to 255. Version 9.6(0.0) Version 9.3(0.0) Supported on the FN 2210S Aggregator. Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module. The FCF priority you assign to an FN 2210S Aggregator is used by server CNAs to select an upstream FCF to use for a fabric login (FLOGI). To remove a configured FCF priority from an FCoE map, enter the no fcfpriority command. fcoe-map - creates an FCoE map which contains the parameters used in the communication between servers and a SAN fabric. show fcoe-map displays the Fibre Channel and FCoE configuration parameters in FCoE maps. fka-adv-period In an FCoE map, configure the time interval used to transmit FIP keepalive (FKA) advertisements. Syntax Parameters fka-adv-period seconds seconds Enter the time period (in seconds) used to send FIP keepalive messages to peer devices. The range is from 8 to 90 seconds. Defaults Command Modes Command History 8 seconds FCoE MAP Version 9.6(0.0) Version 9.3(0.0) Supported on the FN 2210S Aggregator. Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module. Usage Information To delete the FIP keepalive time period from an FCoE map, enter the no fkaadv-erpiod command. 385