Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 321
ip address dhcp, show ip dhcp client statistics, show ip dhcp lease, Command, History, Version 9.40.0
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
Command History Version 9.4(0.0) Supported on the FN I/O aggregator. ip address dhcp Acquire an IP address dynamically on an interface from the DHCP server. Syntax ip address dhcp [relay | vendor-class-identifier] To disable DHCP Client on an interface, use the no ip address dhcp command. Command Modes Default Command History Usage Information INTERFACE Enabled Version 9.4(0.0) Supported on the FN I/O aggregator. In the I/O Aggregator, the DHCP client is enabled only on the default VLAN and management interface 0/0. Use the ip address command to assign a static IP address that overwrites the dynamically assigned IP address. show ip dhcp client statistics Displays DHCP client statistics, including the number of DHCP messages sent and received on an interface. Syntax Parameters show ip dhcp client statistics interface type slot/port interface type slot/port Display DHCP client statistics on the specified interface. • For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/ port information. The slot and port range is 0. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Command Modes Default Command History EXEC Privilege None. Version 9.4(0.0) Supported on the FN I/O aggregator. show ip dhcp lease Displays lease information about the dynamic IP address currently assigned to a DHCP client-enabled interface. Syntax show ip dhcp lease[interface type slot/port] 321