Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 448
description, enable, downstream, Syntax, Parameters, Defaults, Command, Modes, History, Version 9.40.0
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 448 highlights
description Enter a text description of an uplink-state group. Syntax description text Parameters text Text description of the uplink-state group. The maximum length is 80 alphanumeric characters. Defaults Command Modes Command History none UPLINK-STATE-GROUP Version 9.4(0.0) Supported on the FN I/O aggregator. This command is supported in Programmable-Mux (PMUX) mode only. Example Dell(conf-uplink-state-group-16)# description test Dell(conf-uplink-state-group-16)# Related Commands uplink-state-group - creates an uplink-state group and enables the tracking of upstream links. enable Enable uplink state group tracking for a specific UFD group. Syntax enable To disable upstream-link tracking without deleting the uplink-state group, use the no enable command. Defaults Command Modes Command History Related Commands Upstream-link tracking is automatically enabled in an uplink-state group. UPLINK-STATE-GROUP Version 9.4(0.0) Supported on the FN I/O aggregator. This command is supported in Programmable-Mux (PMUX) mode only. • uplink-state-group - creates an uplink-state group and enables the tracking of upstream links. downstream Assign a port or port-channel to the uplink-state group as a downstream interface. Syntax downstream interface To delete an uplink-state group, enter the no downstream interface command. 448