Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 114
ip address dhcp, release dhcp interface, Parameters, interface, Command, Modes, Default, History
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Parameters Command Modes Default Command History interface type slot/port Display log messages for DHCP packets sent and received on the specified interface. • For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/ port information. The slot and port range is 0 • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. EXEC Privilege None Version 9.4(0.0) Supported on the FN I/O aggregator. ip address dhcp Acquire an IP address dynamically on an interface from the DHCP server. Syntax ip address dhcp To disable DHCP Client on an interface, use the no ip address dhcp command. Command Modes Default Command History Usage Information INTERFACE Enabled Version 9.4(0.0) Supported on the FN I/O aggregator. In the I/O Aggregator, the DHCP client is enabled only on the default VLAN and management interface 0/0. Use the ip address command to assign a static IP address that overwrites the dynamically assigned IP address. release dhcp interface Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client configuration on the interface. Syntax release dhcp interface type slot/port 114