Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 416
Defaults, Command, Modes, History, Version 9.40.0, Usage, Information, Related, Commands, Syntax, Parameters
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 416 highlights
Configure this parameter last because leading spaces are ignored. Defaults Command Modes Command History Usage Information Related Commands Not configured. CONFIGURATION Version 9.4(0.0) Supported on the FN I/O aggregator. To configure any number of RADIUS server hosts for each server host that is configured, use this command. Dell Networking Operating System (OS) searches for the RADIUS hosts in the order they are configured in the software. The global default values for the timeout, retransmit, and key optional parameters are applied, unless those values are specified in the radius-server host or other commands. To return to the global default values, if you configure the timeout, retransmit, or key values, include those keywords when using the no radius-server host command syntax. login authentication - sets the database to be checked when a user logs in. radius-server retransmit - sets the number of times the RADIUS server attempts to send information. radius-server timeout - sets the time interval before the RADIUS server times out. radius-server retransmit Configure the number of times the switch attempts to connect with the configured RADIUS host server before declaring the RADIUS host server unreachable. Syntax radius-server retransmit retries To configure zero retransmit attempts, use the no radius-server retransmit command. To return to the default setting, use the radius-server retransmit 3 command. Parameters Defaults Command Modes retries Enter a number of attempts that Dell Networking Operating System (OS) tries to locate a RADIUS server. The range is from zero (0) to 100. The default is 3 retries. 3 retries CONFIGURATION 416