Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 400
qos-policy-output, rate-shape, Related, Commands, Syntax, Parameters, Defaults, Modes, History
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 400 highlights
Related Commands service-queue - assigns a class map and QoS policy to different queues. policy-aggregate - allows an aggregate method of configuring per-port QoS using policy maps. service-policy output - applies an output policy map to the selected interface. qos-policy-output Create a QoS output policy. Syntax qos-policy-output qos-policy-name To remove an existing output QoS policy, use the no qos-policy-output qospolicy-name command. Parameters Defaults Command Modes Command History Usage Information qos-policyname Enter your output QoS policy name in character format (32 characters maximum). none CONFIGURATION Version 9.4(0.0) Supported on the FN I/O aggregator. To specify the name of the output QoS policy, use this command. After the output policy is specified, rate-limit, bandwidth-percentage, and WRED can be defined. This command enables Qos-Policy-Output Configuration mode - (conf-qospolicy-out). Related Commands bandwidth-percentage - assigns weight to the class/queue percentage. rate-shape Shape the traffic output on the selected interface. Syntax rate shape [kbps] rate [burst-KB] Parameters kbps Enter the keyword kbps to specify the rate limit in Kilobits per second (Kbps). Make the following value a multiple of 64. The range is from 0 to 40000000. The default granularity is Megabits per second (Mbps). rate Enter the outgoing rate in multiples of 10 Mbps. The range is from 10 to 10000. burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to 10000. The default is 50. 400