Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 191
show port-channel-flow, XX:XX format.
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Related Commands TenGig 0/1 200 200 0 0 0 0 Dell# clear lacp counters - Clears the LACP counters. show interfaces port-channel - Displays the information on configured Port Channel groups. show port-channel-flow Display an egress port in a given port-channel flow. Syntax Parameters show port-channel-flow port-channel number incoming-interface interface { src-mac address dest-mac address {vlan vlanid | ether-type }} [ src-ip address dest-ip address ] [ src-port number dest-port number ] port-channel number Enter the keywords port-channel then the number of the port channel to display flow information. The range is from 1 to 128. incominginterface interface Enter the keywords incoming-interface then the interface type and slot/port or number information: • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. src-mac address destmacaddress vlan vlan-id ether-type src-ip address dest-ip address src-port number dest-port number Enter the keywords src-mac then the MAC source address in the nn:nn:nn:nn:nn:nn format. Enter the keywords dest-mac then the MAC destination address in the nn:nn:nn:nn:nn:nn format. Enter the keyword vlan then the VLAN ID. The range is from 1 to 4094. Enter the keywords ether-type then the ether-value in the XX:XX format. Enter the keywords src-ip then the IP source address in IP address format. Enter the keywords dest-ip then the IP destination address in IP address format. Enter the keywords src-port then the source port number. The range is from 1 to 65536. The default is None. Enter the keywords dest-port then the destination port number. The range is from 1 to 65536. The default is None. 191