Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 157
show interfaces status, Related, Commands, Syntax, Parameters, linecard, Defaults, Modes, History
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Related Commands 0 packets, 0 bytes, 0 underruns 0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts 0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts 0 Multicasts, 0 Broadcasts, 0 Unicasts 0 throttles, 0 discarded, 0 collisions Rate info (interval 299 seconds): Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate Time since last interface status change: 5d5h23m output truncated show diag - Displays data plane and management plane input/output statistics. show interfaces status Displays a summary of interface information or specify a stack unit and interface to display status information for that specific interface only. Syntax Parameters show interfaces [interface | stack-unit unit-number] status interface (OPTIONAL) Enter one of the following keywords and slot/ port or number information: • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. linecard slotnumber (OPTIONAL) Enter the keyword linecard then the slot number. Defaults Command Modes none • EXEC • EXEC Privilege Command History Example Version 9.4(0.0) Supported on the FN I/O aggregator. Dell#show interface status Port Description Status Speed Duplex Vlan Te 0/1 Up 10000 Mbit Full 1-4094 Te 0/2 Up 10000 Mbit Full 1-4094 Te 0/3 Up 10000 Mbit Full 1-4094 Te 0/4 Up 10000 Mbit Full 1-4094 Te 0/5 Up 10000 Mbit Full -- Te 0/6 Up 10000 Mbit Full 1-4094 Te 0/7 Up 10000 Mbit Full -- Te 0/8 Up 10000 Mbit Full -- Te 0/9 Up 10000 Mbit Full -- Te 0/10 Up 10000 Mbit Full -- Te 0/11 Up 10000 Mbit Full -- 157