ZyXEL NAS540 User Guide - Page 177
Network
View all ZyXEL NAS540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
CHAPTER 9 Network 9.1 Overview This chapter discusses the network configuration screens. The Network screens allow you to configure TCP/IP and PPPoE settings for the NAS. 9.2 What You Can Do • Use the TCP/IP screen (Section 9.4 on page 179) to configure the NAS's TCP/IP network connection settings such as the teaming mode and IP addresses. • Use the UPnP Port Mapping screen (Section 9.5 on page 182) to automatically configure your Internet gateway's firewall and Network Address Translation (NAT) to allow access to the NAS from the Internet. • Use the PPPoE screen (Section 9.6 on page 186) to configure PPPoE settings for a direct Internet connection. • Use the Telnet screen (Section 9.7 on page 187) to enable or disable Telnet access. • Use the DyDNS screen (Section 9.8 on page 188) to configure the domain name settings of your NAS. 9.3 What You Need to Know Teaming Mode The teaming mode sets how the NAS's two Gigabit Ethernet interfaces behave. They can act independently or they can be trunked into a logical link. Here are the teaming mode settings the NAS's two Gigabit Ethernet interfaces can use. NAS540 User's Guide 177