ZyXEL NAS540 User Guide - Page 21
Main NAS Starter Utility Screen
View all ZyXEL NAS540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2 NAS Starter Utility 2.4 Main NAS Starter Utility Screen The main NAS Starter Utility screen displays after you select an NAS in the NAS Seeker screen. Figure 7 NAS Starter Utility Main Screen The following table describes the labels in this screen. Table 2 NAS Starter Utility Main Screen LABEL DESCRIPTION ? Click this to display the utility help. Configuration Click this to configure system settings (see Section 2.6 on page 23). NAS Seeker Click this to use the NAS Seeker screen (Section 2.3 on page 19) to find and connect to a different NAS on your network. Server Name This is the server name you configured for the NAS. If you have more than one NAS in your network, it is recommended that you give each one a unique name for identification purposes. IP Address This is the current IP address of the NAS. MAC Address This is the NAS's unique physical hardware address (MAC). Firmware Version This shows the version of firmware the NAS is currently using. Status This shows whether the NAS is Online, Uninitialized, Unreachable, Configuring, or Config Failed. Run Initialization Wizard This button displays if the NAS detects that the NAS has not yet configured any of the installed hard disks. Click this button to go to the Web Configurator login screen (see Section 4.2 on page 29). Capacity This shows the NAS's total, in-use, and remaining storage capacity. NAS540 User's Guide 21