ZyXEL NAS540 User Guide - Page 24
Configuration > System Setting - user manual
View all ZyXEL NAS540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 2 NAS Starter Utility Click Configuration > System Setting in the main utility screen to display the following screen. Figure 12 NAS Starter Utility > Configuration > System Setting The following table describes the labels in this screen. Table 3 NAS Starter Utility > Configuration > System Setting LABEL Server Name Time Zone Enable PPPoE Connection IP Address DESCRIPTION Specify a name to uniquely identify the NAS on your network. You can enter up to 15 alphanumeric characters with minus signs allowed but not as the last character. The name must begin with an alphabetic character (a-z) and is case sensitive. Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Click this if your Internet connection requires you to enter a user name and password to connect to the Internet. Enter your user name and password Use these fields to configure the IP address of the LAN interface through which you are connected to the NAS. When the LAN interfaces are set to stand-alone, this configures the IP address of the LAN interface in the same subnet as your computer. It configures LAN1 if both LAN interfaces are in the same subnet as your computer. Automatically get IP address Manually assign IP address If you use the administrator configuration screens to set the LAN interfaces to link aggregation, this configures the IP address that both LAN interfaces share. Select this if the NAS is automatically assigned an IP address from the ISP or a DHCP server in your network. Select this if you want to assign the NAS a fixed IP address, subnet mask and default gateway. Note: Do not configure an IP address that is already in use in your network. This results to a network IP address conflict and makes the NAS inaccessible. 24 NAS540 User's Guide