ZyXEL NAS540 User Guide - Page 303

Chapter 19 Maintenance Screens • Use the Syslog Server Setting screen (Section 19.4.4 on page 304) to enable the syslog server and select the categories to include in the log report. 19.4.2 Email Setting You can enable and configure e-mail alerts from the NAS. In the Report Config screen, click the Email Setting tab to open the following screen. Figure 167 Maintenance > Log > Report Config: Email Setting The following table describes the labels in this screen. Table 104 Maintenance > Log > Report Config: Email Setting LABEL DESCRIPTION Enable Log Email Click this to have the NAS e-mail log alerts to your e-mail account. Email To Enter the e-mail address where you want to receive the log alerts. Email From Enter the e-mail address the NAS uses in the From field of the e-mail header for its log alerts. Email Server Enter the e-mail server address the NAS uses to send e-mail alerts, Email Format Select the e-mail format you want the NAS to use in its e-mail alerts. Use SMTP Authentication Click this if the e-mail server you want the NAS to use for its e-mail alerts requires a username and password. User Enter the username for the e-mail server. Password Enter the password for the e-mail server. Password (Confirm) Re-enter the password to confirm it. After apply settings, Click this to have the NAS send a test e-mail to the settings you have entered. send a test email Apply Click this to save your changes. Cancel Click this to return to the previous screen without saving. NAS540 User's Guide 303