HP Officejet 7200 User Guide - Page 41
Load postcards or Hagaki cards, HP Image Zone Help
View all HP Officejet 7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Load originals and load paper Chapter 5 5. Replace the output tray. To load 10 x 15 cm (4 x 6 inch) photo paper in the optional rear tray ➔ The HP Auto Two-sided Print Accessory with Small Paper Tray and the Hagaki Tray with Auto Two-sided Print Accessory are available for this product. For information on loading paper in either of these accessories, read and follow the instructions that came with the accessory. Load postcards or Hagaki cards You can load postcards or Hagaki cards into the main input tray of your HP All-in-One, or into an optional rear input tray. (This accessory is the HP Auto Two-sided Print Accessory with Small Paper Tray. In Japan, it is called the Hagaki Tray with Auto Twosided Print Accessory.) For the best results, set the paper type and size before printing or copying. For more information, see the onscreen HP Image Zone Help. To load postcards or Hagaki cards in the main input tray 1. Remove the output tray. 2. Remove all paper from the input tray. 3. Insert the stack of cards into the far-right side of the input tray with the short edge forward and the print side down. Slide the stack of cards forward until it stops. 4. Slide the paper-length and paper-width guides inward against the stack of cards until they stop. Do not overload the input tray; make sure the stack of cards fits within the input tray and is no higher than the top of the paper-width guide. 5. Replace the output tray. To load postcards or Hagaki cards in the optional rear tray ➔ The HP Auto Two-sided Print Accessory with Small Paper Tray and the Hagaki Tray with Auto Two-sided Print Accessory are available for this product. For 38 HP Officejet 7200 All-in-One series