HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 154
Adding and Removing Members of a Zone, To modify the members of a zone
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
9 5. Enter a name for the new zone in the Create New Zone dialog box, and click OK. If you are creating an LSAN zone, the zone name must begin with "LSAN_". The new zone displays in the Name list. 6. Click plus signs (+) in the Member Selection List to view the nested elements. The choices available in the list depend on the selection made in the View menu. 7. Select an element in the Member Selection List that you want to include in your zone. Note that LSAN zones should contain only port WWN members. The Add Member button becomes active. 8. Click Add Member to add the zone member. The selected member is moved to the Zone Members window. 9. Optional: Repeat steps 7 and 8 to add more elements to your zone. 10. Optional: Click Add Other to include a WWN, port, or QuickLoop (AL_PA) that is not currently a part of the fabric. At this point you can either save your changes or save and enable your changes. 11. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. Adding and Removing Members of a Zone Use the following procedure to add or remove zone members. To modify the members of a zone 1. Launch the Zone Admin module as described on page 9-3. 2. Click the Zone tab. 3. Select the zone you want to modify from the Name drop-down menu. The zone members for the selected zone are listed in the Zone Members list. 4. Highlight an element in the Member Selection List that you want to include in your zone, or highlight an element in the Zone Members list that you want to delete. 5. Click Add Member to add a zone member, or click Remove Member to remove a zone member. The zone is modified in the Zone Admin buffer. At this point you can either save your changes or save and enable your changes. 6. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. 9-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01