HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 272
Configuring SNMP
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
17 To distribute an SCC or DCC Policy 1. Launch the Switch Admin module as described on page 3-3. 2. Select the Distribute tab 3. Select the appropriate behavior from the Consistency Behavior drop-down menu: • Absent means that there will be no policy pushed out to other switches • Tolerant means that the policy will allow legacy switches • Strict means that only Fabric OS version 5.2.0 switches will be allowed 4. Select Apply If the policy distribution fails an error dialog box is displayed. For example, if you implement the Strict Consistency Behavior policy and if some of the fabric switches don't accept the distribution, then the enforcement of the policy will fail. The Fabric Wide Consistency Policy is not set for an individual SCC or DCC policy, they are set to all the SCC or DCC policies on the switch. Configuring SNMP This section describes how to manage the configuration of the SNMP agent in the switch. The configuration includes SNMPv1 and SNMPv3 configuration, accessControl, and systemGroup configuration parameters. T Note This module is read-only if you do not own the switch. For more information, see the snmpConfig command in the Fabric OS Command Reference. 17-12 Web Tools Administrator's Guide Publication Number: 53-0000194-01