HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 156

9 Deleting Zones Use the following procedure to delete a zone. To delete a zone 1. Launch the Zone Admin module as described on page 9-3. 2. Click the Zone tab. 3. Select the zone you want to delete from the Name drop-down menu and click Delete. The Confirm Deleting Zone dialog box displays. 4. Click Yes. The selected zone is deleted from the Zone Admin buffer. At this point you can either save your changes or save and enable your changes. 5. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. Managing QuickLoops QuickLoop is a Brocade software product that allows multiple ports on a switch to create a logical loop. Devices connected via QuickLoop appear to each other as if they are on the same arbitrated loop. QuickLoop can be administered using Fabric OS 5.x; however, switches or directors running Fabric OS 5.x cannot be members of a QuickLoop. SilkWorm 24000 and 48000 directors and SilkWom 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches cannot be members of a QuickLoop. Note You must have a QuickLoop license installed to create or modify a QuickLoop. Creating QuickLoops Use the following procedure to create a QuickLoop. To create a QuickLoop 1. Launch the Zone Admin module as described on page 9-3. 2. Select a format to display zoning members in the Member Selection List as described in "Zoning Views" on page 9-8. 3. Click the QuickLoop tab and click Create. The Create New QuickLoop dialog box displays. 4. Type a name for the new QuickLoop and click OK. 5. Click an element in the Member Selection List that you want to include in the QuickLoop. 9-14 Web Tools Administrator's Guide Publication Number: 53-0000194-01