HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 280
Enabling Port-Based Routing on the SilkWorm 4100 and SilkWorm 48000
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
18 Enabling Port-Based Routing on the SilkWorm 4100 and SilkWorm 48000 Port-based path selection is a routing policy in which paths are chosen based on ingress port and destination only. This also includes user-configured paths. All SilkWorm 4100 and 48000 switches with FICON devices attached must have port-based routing policy enabled. Port-based routing is a perswitch routing policy. After port-based routing is enabled, you can continue with the rest of the FICON implementation. To enable or disable port-based routing 1. Click a switch with FICON devices attached from the Fabric Tree. 2. Launch the Switch Admin module as described on page 3-3. 3. Click the FICON CUP tab. The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in front, as shown in Figure 18-1. 4. Check the Enable box in the Port Based Routing section to enable the port-based routing policy. Uncheck this box to disable port-based routing. 5. Click Apply to save your changes. 18-2 Web Tools Administrator's Guide Publication Number: 53-0000194-01