HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 60

3 Figure 3-1 Switch Admin Module With the exception of switch time, information displayed in the Switch Admin module is not updated automatically by Web Tools. To update the information displayed in the Switch Admin module, see "Refreshing the Switch Admin Module" on page 3-3. Caution Any changes you make in the Switch Admin module are in a buffered environment and are not applied to the switch until you save the changes. (The exception to this is the License tab, where changes are applied immediately and there is no Apply button.) If you close the Switch Admin module without saving your changes, your changes are lost. To save the buffered changes you make in the Switch Admin module to the switch, click Apply before closing the module or before switching to another tab. Some of the management tasks for the SilkWorm 24000 and 48000 directors are performed through the Hi Avail module. This module and the associated tasks are described in "Administering High Availability" on page 3-16. You can also use telnet commands to perform management tasks. See "Launching the Telnet Window" on page 3-3 for information on how to launch a telnet window using Web Tools. The remainder of this section describes basic Switch Admin module procedures that are useful for many switch management operations. 3-2 Web Tools Administrator's Guide Publication Number: 53-0000194-01