HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 158

9 Renaming QuickLoops Use the following procedure to change the name of a QuickLoop. To rename a QuickLoop 1. Launch the Zone Admin module as described on page 9-3. 2. Click the QuickLoop tab. 3. Select the QuickLoop you want to rename from the Name drop-down menu and click Rename. The Rename a QuickLoop dialog box displays. 4. Type a new QuickLoop name and click OK. The QuickLoop is renamed in the Zone Admin buffer. At this point you can either save your changes or save and enable your changes. 5. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. Deleting QuickLoops Use the following procedure to delete a QuickLoop. To delete a QuickLoop 1. Launch the Zone Admin module as described on page 9-3. 2. Click the QuickLoop tab and select the QuickLoop you want to delete from the Name drop-down menu. 3. Click Delete. The Confirm Deleting QuickLoop dialog box opens. 4. Click Yes. The selected QuickLoop is deleted from the Zone Admin buffer. At this point you can either save your changes or save and enable your changes. 5. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. 9-16 Web Tools Administrator's Guide Publication Number: 53-0000194-01