HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 286
Displaying CUP Port Connectivity Configurations
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
18 The Port Connectivity table (shown in Figure 18-4 on page 18-11) displays the Port number (in physical-location format), Port Name (port address name), Block attribute, Prohibit attribute, and Area Id (port address, displayed in hexadecimal) in fixed columns. The right side is a port matrix, which lists all ports by Area ID and identifies prohibited ports. Those columns are scrollable and swappable. Displaying CUP Port Connectivity Configurations Use the following procedure to display a list of CUP port connectivity configurations, as shown in Figure 18-3 on page 18-9. To display the CUP Port Connectivity Configurations list 1. Click a FICON-enabled switch from the Fabric Tree. 2. Launch the Switch Admin module as described on page 3-3. 3. Click the FICON CUP tab. The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in front (see Figure 18-1 on page 18-3). All attributes on this page are read-only until FMS mode is enabled. 18-8 Web Tools Administrator's Guide Publication Number: 53-0000194-01