HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 155
Renaming Zones, Copying Zones, To rename a zone, To copy a zone
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
9 Renaming Zones Use the following procedure to change the name of a zone. To rename a zone 1. Launch the Zone Admin module as described on page 9-3. 2. Click the Zone tab. 3. Select the zone you want to rename from the Name drop-down menu. 4. Click Rename. The Rename a Zone dialog box displays. 5. Type a new zone name and click OK. The zone is renamed in the Zone Admin buffer. At this point you can either save your changes or save and enable your changes. 6. Click Zoning Actions > Save Config Only to save the configuration changes. To enable the configuration, see "Enabling Zone Configurations" on page 9-23. Copying Zones Use the following procedure to copy a zone configuration. To copy a zone 1. Launch the Zone Admin module as described on page 9-3. 2. Click the Zone tab. 3. Select the zone you want to delete from the Name drop-down menu. 4. Click Copy. The Copy An Existing Zone dialog box displays. 5. Enter a name for the copied zone. 6. Click OK. The selected zone is copied from the Zone Admin buffer. 7. Click Zoning Actions > Save Config Only to save the configuration changes. Since no changes were made to the effective configuration, you do not need to enable the configuration. Web Tools Administrator's Guide Publication Number: 53-0000194-01 9-13