HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 183
Accessing Performance Graphs
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
10 The labeling of axes in the graphs depends on the switch type. • For the SilkWorm 24000 and 48000 directors, slot numbers are displayed with expansion arrows next to them, as shown in Figure 10-1 on page 10-5. Click the arrows to expand and contract the list of ports per slot. • For the SilkWorm 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches, slot numbers are not identified. For the Switch Throughput Utilization graph, the X-axis depends on the switch type. • For SilkWorm 24000 and 48000 directors, the X-axis scales up to 102.4 Gbit/sec in multiples of 2. • For SilkWorm 200E, 3250, 3850, 3900, 4100, 4900, and 7500 switches, the X-axis scales up to 4.0 Gbit/sec in increments of 0.4 Gbps. Port throughput utilization is represented by a horizontal bar for each selected port, which gets longer or shorter depending on the percent utilization for that port at the last poll time. Thin short vertical intersecting bars give a historical perspective by representing the highest and lowest values reached for each selected port since the graph was opened. A third bar between them represents the average of all values polled (see Figure 10-1). Figure 10-1 shows how to access the list of Advanced Performance Monitoring graphs using Web Tools. This example displays the graphs available in the Performance Monitor module for a SilkWorm 24000 director with the Advanced Performance Monitoring license installed. Note that the slot number is identified. Figure 10-1 Accessing Performance Graphs Web Tools Administrator's Guide Publication Number: 53-0000194-01 10-5