HP StorageWorks 2/16V Brocade Web Tools Administrator's Guide (53-0000194-01, - Page 242
Optional: To con the IP route, To edit the IP route, iSCSI Port
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
15 6. Click OK. Figure 15-6 Edit IP Interface Dialog Box 7. Enter the subnet mask. 8. Enter the MTU size or accept the default MTU size and click OK. Note To change the IP address, delete the current IP address and re-create it. You will not be allowed to create an additional IP address for this interface, as there can be only one IP address per interface. Optional: To configure the IP route 1. Launch the iSCSI Target Gateway Admin module as described on page 15-6. 2. Select the iSCSI Port tab. 3. From the left pane, select the GbE port that will be used. 4. Select the IP Route tab. 5. Click Add. 15-10 Figure 15-7 Add IP Route Dialog Box 6. Enter the IP address, subnet mask, and gateway IP address, and the metric. 7. Enter the MTU size or accept the default MTU size and click Add. To edit the IP route 1. Launch the iSCSI Target Gateway Admin module as described on page 15-6. 2. Select the iSCSI Port tab. Web Tools Administrator's Guide Publication Number: 53-0000194-01