HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 107
Replace the front panel bezel., After rebooting
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Field Replaceable Units (FRUs) FRU Removal and Replacement 7. Insert and tighten the two T-15 Torx screws to secure the DDS-3 tape drive to the front panel of the workstation, as shown in Figure 4-12 on page 101. 8. Replace the DDS-3/floppy disk drive EMI cover and top panel. 9. Replace the front panel bezel. 10.After rebooting, use SAM to confirm that the DDS-3 tape drive is recognized by the system. Chapter 4 103
Chapter 4
103
Field Replaceable Units (FRUs)
FRU Removal and Replacement
7.
Insert and tighten the two T-15 Torx screws to secure the DDS-3 tape drive to the front
panel of the workstation, as shown in Figure 4-12 on page 101.
8.
Replace the DDS-3/floppy disk drive EMI cover and top panel.
9.
Replace the front panel bezel.
10.After rebooting, use SAM to confirm that the DDS-3 tape drive is recognized by the
system.