HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 26
DDS-3 Tape Drive Optional, DDS-3 Tape Drive Features, DDS-3 Tape Drive LED Display Codes
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Product Information Front Panel Components DDS-3 Tape Drive (Optional) The J5000 and J7000 workstations support either one DDS-3 tape drive or one 3.5-inch floppy disk drive as an optional component. (Since the DDS-3 tape drive and the floppy disk drive use the same device bay, only one or the other can be installed.) The bay for the DDS-3 tape drive or floppy disk drive is located on the top, left-hand side of the front panel. The optional DDS-3 tape drive (Product Number A5011A) is a 3.5-inch, half-height form factor device with an NSE (Narrow Single-Ended) SCSI-2 interface. It connects to the workstation via a 50-pin NSE SCSI-2 ribbon cable and a 4-pin power cable. It has 12 GB native capacity, or approximately 24 GB with data compression. It conforms to the DDS format standard for storing computer data, and is a high-capacity, high transfer-rate device for data storage on tape cartridge. Figure 1-6 shows the operating features of the DDS-3 tape drive. Figure 1-6. DDS-3 Tape Drive Features Left (green) Right (amber) Eject Button LED LED The two colored LEDs on the DDS-3 tape drive indicate different activities or problems that may occur. Figure 1-7 lists the LED codes and their meanings. Figure 1-7. DDS-3 Tape Drive LED Display Codes Left Right (green) (amber) LED LED No power Cartridge loaded; no activity Cartridge loaded; activity Loading/unloading/ejecting/power-on Self-test failed No cartridge; caution (cleaning required) Cartridge loaded; caution (cleaning required) Cartidge loaded; drive active; caution (cleaning required) Cartridge loading/unloading; caution (cleaning required) CD Mode "warbling" Legend: Off On Flashing (4Hz) Flashing (2Hz) 22 Chapter 1