HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 201
Assigning LVD SCSI Device IDs
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
SCSI Connections Assigning SCSI Device IDs Assigning LVD SCSI Device IDs You can determine which LVD SCSI devices are currently in use by looking under the H/W Path heading in the output from the ioscan command discussed previously. The entry 10/0/15/1 is the built-in LVD SCSI bus. For devices connected to the built-in LVD SCSI bus, such as disks, the number between the two decimals and after the third "/" in the hardware path specifies the SCSI ID for that device. For example, a hardware path of 10/0/15/1.5.0 specifies a LVD SCSI device at SCSI ID 5. Here is the breakdown of the hardware path: SCSI device 10/0/15/1.5.0 LVD SCSI 10/0/15/1.5.0 SCSI ID 5 10/0/15/1.5.0 CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus controller. Appendix C 197