HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 87
Tools Required, Exchange and Nonexchange Part Numbers, T-10, and T-20 Torx drivers
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Field Replaceable Units (FRUs) Tools Required Tools Required Use the following tools to remove or replace FRUs: • Light-duty flat blade screwdriver with 6-inch (150 mm) blade • #1 Posi-Drive screwdriver • T-10, T-15, and T-20 Torx drivers • Needle-nosed pliers • ESD equipment (see the "Electrostatic Discharge (ESD) Precautions" section later in this chapter for detailed information) Exchange and Nonexchange Part Numbers In this chapter we refer to exchange and nonexchange part numbers. You must return FRUs with exchange part numbers in exchange for replacement FRUs. Do not return FRUs with nonexchange part numbers - you may discard them. The following Tables 4-1 and 4-2 list the exchange part numbers for the J5000 and the J7000 workstation, respectively. Table 4-1. J5000 Exchange Part Numbers Part Number A4978-69010 A4978-69001 A4978-69020 A3862-69001 A3863-69001 A1658-69027 A1658-69026 C1537-69202 Description PCA system board tray assembly Power supply 830 W PCA - I/O board 256 MB SDRAM DIMM 512 MB SDRAM DIMM LVD hard disk drive 9 GB 10K RPM LVD hard disk drive 18 GB 10K RPM SCSI DDS-3 tape drive 12 GB Chapter 4 83