HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 178
ISL User Commands, of the ISL Boot Flags.
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Boot Console Handler ISL Environment ISL User Commands The following commands that are available in the ISL environment allow you to display and modify the boot characteristics of the system. • help - lists ISL command menu and available utilities. • display - displays the boot and console paths in Stable Storage and the current setting of the ISL Boot Flags. • primpath - modifies the primary boot path entry in Stable Storage. The entry in Stable Storage for the primary boot device begins at byte address 0 and ends at 31. • altpath - modifies the alternate boot path entry in Stable Storage. The entry for the alternate boot device begins at byte address 128 and ends at 159. • conspath - modifies the console path entry in Stable Storage. The entry in Stable Storage for the console device begins at byte address 96 and ends at byte address 127. The entry for the keyboard and mouse devices begins at byte address 160 and ends at 191. • listautofl or lsautofl - lists the contents of the (HP-UX) autoboot file. • support - boots the Support Tape from the boot device. • readss - displays 4 bytes (one word) from Stable Storage. The readss command requires a decimal number between 0 and 255 to address four bytes in Stable Storage. 174 Chapter 5