HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 128
during insertion., rock the I/O card from side to side
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Field Replaceable Units (FRUs) FRU Removal and Replacement 5. If a filler plate is installed in the I/O slot on the rear panel of the workstation, remove the screw that secures the filler plate and remove the filler plate. Save the screw for securing the I/O card you will install, and save the filler plate for later use. 6. Insert the I/O card in the card guides and press the card firmly and evenly into the I/O slot connector until the I/O card is fully seated in the slot. CAUTION To avoid damage to the connector, do not rock the I/O card from side to side during insertion. 7. Secure the I/O card with the filler panel screw to the I/O slot. 8. Replace the PCI retainer clip. 9. Replace the workstation's top and right side panels. 10. After rebooting, use SAM to confirm that the I/O card is recognized by the system. 124 Chapter 4