HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 74

Troubleshooting Identifying LCD-Indicated Conditions Table 3-1. Chassis Codes for J5000 and J7000 Workstations Ostat INI INI INI WRN INI WRN INI WRN INI WRN INI WRN FLT WRN WRN FLT WRN WRN INI INI Code FRU 916s EXT IO 91DB IO BD 9C51 9C51 IO BD IO BD 9C52 9C52 IO BD IO BD 9C6s EXT IO 9C6s EXT IO 9C8t EXT IO 9C8t EXT IO 9CDB 9CDB IO BD IO BD A088 A008 A0BD IO BD EXT IO EXT IO A0FF EXT IO A50F A70F EXT IO EXT IO C10m SYS BD C30m SYS BD Message Description init PCI slot s Initializing PCI device in slot s as console display. init SERIAL_LDB Initializing serial LDB port as console display. consol is SER_1 Console display is on serial port 1. bad init SERIAL1 Serial port 1 failed to initialize as a console device. consol is SER_2 Console display is on serial port 2. bad init SERIAL2 Serial port 2 failed to initialize as a console device. consol is GRAPHs Console display is on graphics card in PCI slot s. bad PCI slot s Graphics in PCI slot s failed to initialize as a console device. cnfg mon type t Set graphics console to monitor type t. (Seen when cycling through types.) mon type t fail Failed to configure console to monitor type t. consl is SER_LDB Console display is on serial LDB port. bad init SER_LDB Serial LDB port failed to initialize as a console device. consl path fault Unable to boot--no console device found. no boot device Unable to boot--no bootable device found. device not ready Boot device not ready--operation may be retried. unknown launch Unable to boot. Explanation may appear on console. init pri pth err Unable to boot from primary boot device. init otr pth err Unable to boot from non-primary boot device. CPUm is monarch CPU m was chosen as the monarch processor. (All other CPUs are slaves.) monarchm test CPU m finished the monarch-only tests and system initialization. 70 Chapter 3