HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 43
Memory, DDS-3 Tape Drive Settings for Data Compression Operation Mode
View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Configuration Field Replaceable Unit (FRU) Configurations Figure 2-3. DDS-3 Tape Drive Settings for Data Compression Operation Mode Operation Mode Switches Compression Disabled, No Host Control Compression Enabled, No Host Control Compression Disabled, Host Can Control Compression Compression Enabled, With Host Control Default Setting Floppy Disk Drive (Optional) Configuration The optional 3.5-inch floppy disk drive requires no ID, switch, or jumper settings. See the section titled "Floppy Disk Drive (Optional)" on page 104 for details on installing a floppy disk drive. Memory J5000 Memory Configuration The J5000 workstation has eight memory slots, labeled 0 to 7. Memory DIMMs can be installed individually in this workstation. The DIMMs for this workstation currently come in 256 MB and 512 MB sizes (Product Numbers A4994A and A4995A, respectively). This workstation comes with one 512 MB DIMM as its standard configuration from the factory. Thus, currently the minimum memory configuration for this workstation is 512 MB, and the maximum is 4 GB. DIMMs should be loaded in the order shown in Figure 2-4 on the next page, with slot 0 being the first DIMM loaded, and 7 being the last DIMM loaded. Different sizes of DIMMs can be loaded in this workstation (that is, 256 MB DIMMs can be loaded with 512 MB DIMMs). Chapter 2 39