HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 18

Product Information Chapter Overview Chapter Overview This chapter contains the following main sections: • Product Description • Front Panel Components • Rear Panel Components • Internal Components • Monitors • Keyboard and Mouse • Site Preparation and Installation Product Description The HP VISUALIZE J5000 and J7000 workstations are high-performance systems capable of handling the most complex problems in computational analysis, advanced 3-D design, and electronic circuit design and verification. The J5000 and J7000 workstations are similar in many ways. However, they differ in their system boards and power supplies. The J5000 has two PA-8500 microprocessors and eight memory slots on its system board, and an 830 Watt power supply with no DC/DC converter units required. In contrast, the J7000 has four PA-8500 microprocessors and sixteen memory slots on its system board, and a 1,350 Watt power supply with two DC/DC converter units. A detailed list of both workstations' features is provided in the "Key Features" subsection on the next page. Physical Dimensions and Net Weights Both workstations use a common chassis, which is 17.5 inches (44.5 cm) high × 13.6 inches (34.5 cm) wide × 21.0 inches (53.3 cm) deep. Both are also rack-mountable, using the J1458A Rack Mount Kit. Table 1-1 lists the net weights for each workstation. Table 1-1. Net Weights for the J5000 and J7000 Workstations J5000 J7000 Minimum Configuration 74 pounds (34 Kg) 81 pounds (37 Kg) Maximum Configuration 88 pounds (40 Kg) 96 pounds (44 Kg) NOTE For a list of the environmental and electrical requirements for each workstation, see the specifications in Appendix A starting on page 178. 14 Chapter 1