HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 68

Troubleshooting Identifying LCD-Indicated Conditions Table 3-1. Chassis Codes for J5000 and J7000 Workstations Ostat INI FLT FLT INI INI INI INI INI FLT FLT FLT INI TST WRN INI INI INI WRN INI Code FRU 7206 DIMM 7207 DIMM 7208 721s 722s DIMM DIMM DIMM 723s 724s 725s 72As DIMM DIMM DIMM DIMM 72Cs DIMM 72Ds DIMM 7300 7301 SYS BD SYS BD 7302 SYS BD 7303 SYS BD 7304 SYS BD 7305 SYS BD 7306 SYS BD 7307 SYS BD Message Description non-HP DIMM type New non-HP DIMM type added to tables (use at own risk). DIMM table full The DIMM table is full--cannot add new type. no DIMMs found SPD didn't find any memory DIMMs. is DIMM s inst? SPD is checking memory slot s. ???? DIMM in s SPD found a DIMM in slot s, but can't determine its size. DIMM will not be used. 128M DIMM in s SPD found a 128MB DIMM in slot s. 256M DIMM in s SPD found a 256MB DIMM in slot s. 512M DIMM in s SPD found a 512MB DIMM in slot s. DIMM s checksum DIMM in slot s failed SPD checksum and will not be used. DIMM s mismatch DIMM in slot s didn't match the other in pair. (J7000 only--DIMMs must be in matched pairs.) DIMM s load err Memory DIMMs are not in the proper order. As a result, the system cannot access DIMM s and has deallocated it. mem config start Starting main memory configuration. check mem config Checking for memory configuration change since last boot. mem confg changd Memory physical configuration changed since last boot. use confg change Memory physical configuration didn't use saved configuration change. Use stored configuration data. build mem intrlv Building memory configuration with all DIMMs interleaved. save mem config Saving memory configuration information in non-volatile memory. use alt mem conf Memory will be configured from fixed values, instead of detected DIMMs. interleve memory Generating the memory interleave. 64 Chapter 3