HP Visualize J5000 hp Visualize J5000, J7000 workstations service handbook (a4 - Page 77

Troubleshooting Identifying LCD-Indicated Conditions Table 3-1. Chassis Codes for J5000 and J7000 Workstations Ostat WRN WRN WRN INI WRN WRN WRN WRN WRN WRN FLT WRN WRN WRN FLT Code FRU CB04 SYS BD CB05 SYS BD CB0A SYS BD CB0B SYS BD CB0C SYS BD CB10 SYS BD CB11 SYS BD CB12 SYS BD CB13 SYS BD CB14 SYS BD CB1F SYS BD CB71 SYS BD CB72 SYS BD CB73 SYS BD CB9r IO BD Message Description bad OS TOC len The size of the operating system TOC handler is invalid. Firmware will soft boot the system. bad OS TOC chksm The operating system TOC handler failed the checksum test. Firmware will soft boot the system. prev TOC logged branch to OS TOC Firmware detected unread PIM data from a previous TOC and will not overwrite it. (PIM for this TOC is lost.) Branching to the operating system TOC handler. br OS TOC failed Branch to the operating system TOC handler failed. Firmware will soft boot the system. LPMC initiated icache LPMC err A Low-Priority Machine Check entered the firmware LPMC handler. The handler should log the error and return to normal operation. An instruction cache parity error caused the LPMC. dcache LPMC err A data cache parity/ECC error caused the LPMC. dcache tag error The parity error is in the tag portion of the data cache. dcache data err The parity error is in the data portion of the data cache. OS LPMC failed Firmware couldn't branch to the operating system LPMC handler. It will halt the CPU, requiring a power cycle to recover. HPMC occurred A High-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). LPMC occurred A Low-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler). TOC occurred A Transfer of Control caused entry to PDCE_CHECK (the firmware trap handler). Error on roper An error was detected on rope r. Chapter 3 73