Konica Minolta Fujitsu fi-6800 Operating Guide - Page 110

Chapter 5 Various Ways to Scan 5.5 Customizing the Hardware Settings Using a Button on the Scanner to Start Scanning You can perform scanning by simply pressing the [Scan] button or the [Send to/Pause] button on the scanner. For this, you first need to assign the applications to launch for each button. 6 Click the [Events] tab and select an event. From the [Select an event] menu, select an event from which you want to launch an application. Computer settings 1 Confirm that the scanner and the computer are connected, and power on the scanner. For information on how to connect the scanner and the computer, refer to "Connecting the Cables" in "Getting Started". 2 Select the [Start] menu J [Control Panel]. D The [Control Panel] dialog box appears. 3 Click the [Hardware and Sound] icon. D The [Hardware and Sound] dialog box appears. 4 Click the [Scanners and Cameras] icon. D The [Scanners and Cameras] dialog box appears. 5 Display the scanner properties. Double-click the scanner icon. In this function, the following events can be specified: z [Scan] button (when the [Scan] button is pressed) z [Send to 01] to [Send to 50] (when the [Send to/Pause] button is pressed) TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 110