Konica Minolta Fujitsu fi-6800 Operating Guide - Page 136

Chapter 7 Replacing Consumables 4 Close the roller cover. Make sure that both ends of the cover are locked firmly. Separator Roller Roller cover 5 Close the ADF. For information on how to close the ADF, refer to "1.5 Opening/ Closing the ADF" (page 20). Be careful not to have your fingers caught when the ADF closes. z Do not close the ADF while the roller cover is open. z Confirm that the separator roller is installed properly. When the separator roller is not installed properly, it causes feeding errors such as paper jams. 6 Reset the separator roller counter. Reset the counter by one of the following methods. z Select [23: Show/Clear Counters] from the [Main Menu] on the operator panel, then reset the counter. For more details, refer to "4.2 Main Menu" (page 65). z Start up the Software Operation Panel and reset the counter. For more details, refer to "Resetting the counters" (page 183). TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 136