Konica Minolta Fujitsu fi-6800 Operating Guide - Page 80

Chapter 4 How to Use the Operator Panel Item Information Description [Information] appears as an item in [Main Menu] only when displayed on the LCD. Setting/Value Factory Default - : No settings/values Message for replacing consumables / is cleaning / replacing maintenance parts / regular maintenance Only displayed when there is information *1: Although there is no factory default setting, it is set to [1: Movable] when you turn on the power. Therefore, the setting does not change even when you initialize the operator panel. *2: Although there is no factory default setting, it is set to [4: Lower] when you turn on the power. Therefore, the setting does not change even when you initialize the operator panel. *3: Although there is no factory default setting, the settings are configured as follows when you turn on the power: [2: Multiple sheets] for [No. of sheets scanned], [1: Front Side] for [Print], [1: (L)ABCDEFGHIJKLMNOPQRSTUVWXYZ[|]^_'00000000] for [Print Pattern], and [1: Yes] for [Test Print]. Therefore, the settings do not change even when you initialize the operator panel. *4: [Print: 1: Front Side / 2: Back Side] does not appear unless both Front-Side and Back-Side Imprinters are installed. *5: Although there is no factory default setting, it is set to [2: No] when you turn on the power. Therefore, the setting does not change when you initialize the operator panel. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 80