Konica Minolta Fujitsu fi-6800 Operating Guide - Page 119

Chapter 6 Daily Care 6.1 Cleaning Materials and Locations that Require Cleaning Cleaning Materials Cleaning material Cleaner F1 Cleaning Sheet Cleaning Wipe Cotton swab Dry cloth Part No. Remarks PA039500352 100 ml/bottle Moisten a cloth with this fluid and wipe the scanner clean. It may take longer to dry if an excessive amount of this liquid is used. Moisten the cloth with a moderate quantity. Make sure to wipe off this fluid from the cleaning location. CA995010016 20 sheets/pack This is an A4 size cleaning sheet. Use two sheets to clean once. PA039500419 24 packets/box Pre-moistened with Cleaner F1. Cleaning Wipe can be used instead of moistening a cloth with Cleaner F1. Commercially available For more information about the cleaning materials, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Locations to Clean and Cleaning Frequency Cleaning should be performed approximately every 10,000 sheets scanned. Note that this guideline varies depending on the type of documents you scan. For instance, it may be necessary to clean more frequently when you scan documents on which the toner is not sufficiently fused. Cleaning location Cleaning Sheet (every 10,000 sheets) Cloth sprayed with Cleaner F1/Cleaning Wipe (every 10,000 sheets) Pick Roller 3 3 Separator Roller 3 3 Brake Roller 3 3 Feed Roller 3 3 Assist Roller 3 3 Pinch Roller 3 3 Paper Path 3 3 Sheet Guide/ - 3 Glass Document - 3 Sensor Friction Pad - 3 3 : Cleanable - : Not cleanable TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 119