Konica Minolta Fujitsu fi-6800 Operating Guide - Page 178
Soft Pick Setting, Jam Detection
View all Konica Minolta Fujitsu fi-6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Chapter 9 Operational Settings Item Description Setting/Value Soft Pick Setting When you experience pick errors from the separator roller slipping on the paper, or paper jams from scanning thin papers of small widths, the symptom may be improved by bringing down the pick roller unit and keeping the unit at the lower position (disabling the Soft Pick Setting). It can also be configured from the operator panel. Enable / Disable AutoCrop Boundary Specify whether or not to optimize (round up/down) the fractional part of the scanned image data. Normal / Optimize Auto color Detection Specify the slice level for automatic 1 to 255 levels color/monochrome detection. Alarm setting Specify whether or not to sound an alarm when an error such as multifeed or paper jam occurs. It can also be configured from the operator panel. Disable alarm / Low volume alarm / High volume alarm Jam Detection outside of scannable area when transporting paper Specify whether or not to judge the symptom as paper jam when a document is skewed and passes outside the supported scanning area. Enable / Disable Factory Default SCSI or USB SCSI or USB Connector 1 Connector 2 3: Configurable -: Not configurable Enable 3 3 Normal 3 - 5 3 - Disable alarm 3 3 Enable 3 3 TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 178