Epson Stylus Pro 9000 Service Manual - Page 127
Test Print, Clean Head (Drain Ink), Cleaning, Update
View all Epson Stylus Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
EPSON Stylus Pro 9000 TEST PRINT This function lets you print all the check patterns used in making adjustments as covered in this chapter. It also lets you print a list of the current settings of all the adjustments. Table 5-10. Printed Items in the Test Print Item Description Nozzle Check Prints all of the check patterns. Adjustment Variables Prints a list of all adjustment settings. To print the list of adjustment variables, you need to enter the printer's serial number when prompted. The serial number is located on the back of the printer, next to the power connector. [SelecType]/ [Paper Source] Print: Nozzle Check [Enter] Printing Pattern Print: Adj. Variable End adjustment/ next menu [SelecType]/ [Paper Source] Paper Feed +/- No. X: PEG X = "1"~"4" * = Serial number Print Adj. Pattern [Enter] Printing Pattern The printer prints the adjustmentparameter list, ejects the paper, and proceeds to next menu. CLEAN HEAD (DRAIN INK) This function allows you to drain the ink from the ink delivery system including the printheads. Perform the Clean Head function before moving the printer. Adj Clean Head [Enter] Please Remove Ink Remove all ink cartridges. Please Lower InkLever Lower both ink set levers. Please Remove Ink [Enter] Cleaning Perform ink drain operation. Set Cleaning Jig [Pause] Not applicable for service purposes Press the Pause button to quit this menu and complete this operation. After draining the ink and performing any necessary operations such as moving the printer, be sure to perform the initial ink charge as described in Cleaning menu on page 128, or reset the initial ink charge flag as described in Update on page 129. Adjustments 127