Epson Stylus Pro 9000 Service Manual - Page 169
Initialization, Power On initialization
View all Epson Stylus Pro 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
EPSON Stylus Pro 9000 7.3 Initialization This section describes the initialization procedures for the EPSON Stylus Pro 9000. Power On initialization When the power is turned ON or a cold reset command is sent to the printer (remote RS command), the printer does the following: Initializes the printer mechanism Clears the input data buffer Clears the print buffer Restores the default values Software initialization: Activated by the ESC@ command. The following happens: Clears the print buffer Restores the default values Operation initialization Activated when the Reset button is pressed or the printer receives an INIT signal (negative pulse) from the parallel interface. The following happen: Caps the printheads Ejects the paper if a cut sheet is loaded Clears the input data buffer Clears the print buffer Resets the following default values: Page Position Current paper position as page-start position Line feed 1/6 inch Right margin 440th character Left margin 1st character Character pitch 10 CPI Print mode Text mode (non-raster graphics mode) Appendix 169