Epson Stylus Pro 9000 Service Manual - Page 158

EPSON Stylus Pro 9000 7.2.4 Electrical The electrical specifications are for the 120 and 230 V units. Rated voltage Input voltage range Rated frequency range Input frequency range Rated current Power consumption Insulation resistance Dielectric strength 120 to 140 VAC 90 to 264 VAC 50 to 60 Hz 49.5 to 61 Hz 120 V: 0.5 A 230 V: 1.0 A (maximum 1.8 A) Approximately 100 W (operating) Approximately 30 W (standby) (ISO/IEC 10561 letter pattern) Energy Star compliant 10 M Ω minimum (between AC line and chassis 500 VDC) 1500 V rms 1 minimum (between AC line and chassis) 7.2.5 Environmental Temperature Operation Storage Transportation 59 to 95 °F (15 to 35 °C) -4 to 104 °F (-20 to 40 °C) -4 to 140 °F (-20 to 60 °C) Humidity (without condensation) Operation 30 to 80% Storage 20 to 85% Transportation 5 to 85% Vibration resistance Operation 0.15 G, 10 to 55Hz / X, Y, Z direction Storage 0.50 G, 10 to 55Hz / X, Y, Z direction Shock resistance Operation Storage 1 G, within 1 ms / X, Y, Z direction 2 G, within 2 ms / X, Y, Z direction NOTE: Less than 1 month at 104 °F (40 °C); less than 120 hours at 140 °F (60 °C) When storing the printer, make sure the printheads are in the home, capped, position. Before transporting the printer, remove the ink cartridges and turn the ink valves screws to the closed position. Also make sure the printheads are in the home, capped, position. After transporting the printer, install new ink cartridges. When the temperature drops below 5 °F (-15 °C), the ink in the cartridges and printheads freezes. The ink thaws completely after 3 hours at 77 °F (25 °C). 7.2.6 Ink Cartridge Shape Each ink cartridge is uniquely shaped so the cartridges cannot be inserted into the wrong slots. Ink colors Black, cyan, magenta, yellow, light cyan, light magenta Appendix 158