Epson Stylus Pro 9000 Service Manual - Page 14

EPSON Stylus Pro 9000 Table 1-4. SelecType Menus (continued) Menu Description For more information Paper Configuration Register paper thickness and drying time, and select registered configurations page 16 Cutter Replacement Replace the paper cutter blade page 16 Head Alignment Align the printhead page 16 PRINTER SETTING MENU The bold item is the default setting. Table 1-5. Printer Setting Menu Message Item Explanation PLATEN GAP AUTO THICK Adjusts the platen gap. Normally leave set to AUTO. PAGE LINE ON OFF When AUTO CUT OFF is selected on the control panel, this setting determines whether a line for manual cutting is printed INTERFACE AUTO PARALLEL MAC Determines which interface the printer checks for data. AUTO continuously checks all interfaces and is good for normal use. MAC is the serial interface. OPTION PARA. I/F COMPAT* ECP Determines the data transfer rate when using this interface. Normally leave set to COMPAT*. CODE PAGE PC437 PC850 Character code setting. PC437 is for expanded graphics. PC850 is for multilingual. ROLL MARG T/B15MM* Top and bottom margins are 0.59 in. (15 mm). The left and right margins are 0.12 in. (3 mm). 15MM All margins are 0.59 in. (15 mm). 3MM All margins are 0.12 in. (3 mm). INIT. PANEL EXEC. Initialize control panel setup values * The printed image is the same size as the printed image using the 0.12 inch (3 mm) setting. However, the printer adds 0.47 inch (12 mm) of paper clearance (for a total margin of 0.59 inch [15 mm]) to the top and bottom edges to make paper feeding more stable and to prevent the paper from rubbing the printheads. Printer Basics 14