HP Color 9850mfp HP Color 9850mfp - System Administrator Guide - Page 109
Reset, Start, reaches zero. The print quantity amount on the Check screen does not change.
View all HP Color 9850mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Note Press Stop to suspend the proof copying. In this case, the scanned image data is not deleted from memory. You cannot change or release selections that appear dimmed after proof copying. Note ● When the copy result is satisfactory, proceed to the next step. ● When any setting change is required, return to step 4, and then repeat proof copying, as required. ● If the desired selection cannot be changed, press Stop to delete all the data in memory, and then press Reset to restart the job setting. 6 Change the copy quantity or other conditions, as required. Proof Copy can be performed as needed, until the print quantity amount on the Main screen reaches zero. (The print quantity amount on the Check screen does not change.) If required, change the print quantity on the Main screen. 7 Press Start. If the print quantity is not changed, the MFP generates the remaining copies, minus the sample sets. When the Finisher/Trimmer Unit/100-sheet output tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit to avoid misfed paper. ENWW 97